Gun store Shooting Locations It is currently Fri Mar 29, 2024 5:08 am



Rules WGO Chat Room Gear Rent Me Shield NRA SAF CCKRBA
Calendar




Reply to topic  [ 15 posts ] 
 Anybody use CFE223 for 55gr FMJ .223? 
Author Message
Site Supporter
User avatar
Site Supporter

Location: Lacey
Joined: Thu Nov 29, 2012
Posts: 2288
Real Name: Jim
I have 4lbs of CFE223 powder, which I have never used and do not have any load data for in my Lee book.

Have any of you used this powder/bullet combo with success?


Thu Nov 12, 2020 8:01 pm
Profile
User avatar

Location: Arlington wa
Joined: Wed Oct 12, 2011
Posts: 1114
Given my rifle, and my skill level, I've had decent results with cfe223 and hornady 55's. The full thread is here... https://www.waguns.org/viewtopic.php?f=74&t=113366

_________________
You can only run for so long, and if you do you'll still be surrounded and out numbered so hold the line.


Thu Nov 12, 2020 8:13 pm
Profile
Online
Site Admin
User avatar
Site Admin

Location: Renton, WA
Joined: Sun Mar 13, 2011
Posts: 51919
Real Name: Steve
You can use the Hodgdon Reloading Data Center for all Hodgon powders, including this one: https://www.hodgdonreloading.com/

_________________
Steve

Benefactor Life Member, National Rifle Association
Life Member, Second Amendment Foundation
Patriot & Life Member, Gun Owners of America
Life Member, Citizens Committee for the Right to Keep and Bear Arms
Legal Action Supporter, Firearms Policy Coalition
Member, NAGR/NFGR

Please support the organizations that support all of us.

Leave it cleaner than you found it.


Thu Nov 12, 2020 9:58 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: The banana belt of MT
Joined: Wed Dec 30, 2015
Posts: 8578
Real Name: Brian
55 grain rounds with CFE223 work great with 1/8 barrel twist or better.
Avoid 55 grain with 1/7 twist rate common with Newer Colt AR15s. My Colt LE6920 with a 1/7 twist hates 55 gr rounds The Colt loves 62 grain rounds its very accurate.

Now, the wifes AR15, .223 Wilde, has a 1/8 twist. It loves 55 grain boolits.

_________________
"I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me."- Hunter S. Thompson


Mon Nov 16, 2020 6:32 pm
Profile
User avatar

Location: Seattle Washington USA
Joined: Tue Aug 25, 2020
Posts: 126
Barfly wrote:
I have 4lbs of CFE223 powder, which I have never used and do not have any load data for in my Lee book.

Have any of you used this powder/bullet combo with success?


I have not used CFE223 yet, but I am also hoping it works well in my rifle. I have read many people's endorsement of the combination you mentioned... The last few weeks I have increased my powder stockpile with CFE 223 and H335. I would hate to see powder become scarce like primers, so I am erring on the side of caution.


Wed Nov 18, 2020 3:29 pm
Profile
User avatar

Location: Arlington wa
Joined: Wed Oct 12, 2011
Posts: 1114
We might need a new new thread for members to post their best group using cfe223 and a 55gr projectile recipes.

_________________
You can only run for so long, and if you do you'll still be surrounded and out numbered so hold the line.


Wed Nov 18, 2020 9:20 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: In my Cave near the Cloquallum
Joined: Thu Sep 26, 2013
Posts: 7758
Real Name: Jim Sr.
Nope, not a good combo at all brother, sell it to mee at a reduced rate... icon_eek icon_eek icon_eek

Seriously speaking though, I’ve been using CFE223 for a few years, it works for plinking but do not expect match bullet results with 55g FMJ’s. I’m not one who measures my plinking groups but I can hit the 6” gong 30 out of 30 rounds at Evergreen sportsman club with them. Good nuff for me I recon.

Good luck on your quest for excellence. :wink05:

_________________
"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Wed Nov 18, 2020 10:50 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Lacey
Joined: Thu Nov 29, 2012
Posts: 2288
Real Name: Jim
Thanks for the i fo guys. Going to get some loaded up this weekend and see jow i like it.


Fri Nov 20, 2020 5:31 pm
Profile
User avatar

Location: Union Gap
Joined: Sun Mar 27, 2016
Posts: 1722
Real Name: Randall Knapp
You will like the CFE223 just fine. I have six powders that I use for .223 with equal accuracy. For fine grained powder I use my Auto Drum for kernals I use my Lyman 55 to throw the charge and then set the charged cartride into the right spot in my Lee Loadmaster and crank the handle. The finer grains just allow me to work the press a bit faster.


Sat Nov 21, 2020 2:06 am
Profile
User avatar

Location: Puyallup
Joined: Tue Sep 18, 2018
Posts: 3027
I've never used it, but it's known to be a good one. Very common.

_________________
I'm a Morlock, in a land of Eloi...


Sun Nov 22, 2020 12:35 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Kirkland
Joined: Tue Aug 19, 2014
Posts: 90
Real Name: Johnny
I've been using CFE223 (27.8gr) for a few years with Hornady 55gr FMJ on ARs with good results. Recently I tried it on my new Savage bolt action 22" 1/7 with the exact same load but seated the bullet a little further out. It can easily print 1" or under at 100yds.


Fri Dec 04, 2020 2:59 pm
Profile
User avatar

Location: PORT ORCHARD
Joined: Sat Nov 21, 2020
Posts: 98
Real Name: Ted
how old is your Lee manual? CFE223 is in the second edition.

I'm a pretty new reloader but wasn't CFE223 specifically designed for .223/5.56 reloading? Is there something about it that folks have found make it less than ideal for 223?


Mon Jan 04, 2021 6:35 pm
Profile
User avatar

Location: Arlington wa
Joined: Wed Oct 12, 2011
Posts: 1114
SteelHeadTed wrote:
how old is your Lee manual? CFE223 is in the second edition.

I'm a pretty new reloader but wasn't CFE223 specifically designed for .223/5.56 reloading? Is there something about it that folks have found make it less than ideal for 223?


The only down side that I'm aware of its not as temp stable when compared to varget/xbr/h4895.

_________________
You can only run for so long, and if you do you'll still be surrounded and out numbered so hold the line.


Mon Jan 04, 2021 10:06 pm
Profile
User avatar

Location: Renton
Joined: Sat Dec 1, 2018
Posts: 373
All of my 55gr .224 projectiles are for my blaster plinking ammo. Therefore, my go-to load is just 26.5gr of CFE223, seated to max P-Mag length. They work great up to about 200 yds. If you really want to thread the needle, you need to go with a heavier bullet with the right twist rate in barrel. 55gr is not meant to be super accurate at distance. It is very light and gets pushed around by the wind pretty easily compared to the heavier bullets.

CFE223 can also be used for .308. The fine granuals meter fantastically.


Sun Mar 21, 2021 12:18 am
Profile
User avatar

Location: Federal Way,WA
Joined: Mon Jul 9, 2012
Posts: 204
Real Name: John
I have excellent results using Accurate 2460 for my 40 grainers and 50's with match primers


Sun Apr 18, 2021 2:31 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 15 posts ] 

Who is online

Users browsing this forum: No registered users and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



Rules WGO Chat Room Gear Rent Me NRA SAF CCKRBA
Calendar


Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.
[ Time : 0.659s | 16 Queries | GZIP : Off ]