I've got an old .32acp Ruby pistol manufactured in Spain for sale here in the U.S. and sold under the name "Vilar". Field stripping of these little pistols is pretty straight forward. My little pistol, however, has a little snag. After twisting the barrel to unlock the barrel from the frame, the slide catches on something in the frame, instead of sliding off. Can anyone with any knowledge about these pistols chime in about something I might be overlooking, or any commonly known issues or broken parts that would cause this? Thanks in advance for any replies.
Thu Oct 06, 2011 10:38 am
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52029
Real Name: Steve
Yep. Just like that, with the exception that once my gun's barrel is removed, the slide hangs on something after moving .75" towards the front of the frame. I've seen that video and another on how to field strip this gun. I'm actually really impressed with this little gun. I picked it up last week for $75 and I'm hoping to get it back into a working firearm. Thanks.
Thu Oct 06, 2011 11:22 am
TacticalAssault
Founding Father
Location: Woodinville Joined: Fri Mar 11, 2011 Posts: 4631
I've actually worked on one of these a while back that was having the same issue. If I remember correctly it had a bent or damaged ejector that was preventing the slide from coming off. It's possible that a pin has also worked it's way loose and it binding the slide. A few moderate taps with a rubber mallet got the slide off and then I addressed the issues. When I say moderate I mean fairly aggressive but not full power by any means. Start by tapping the rear of the slide gently and slowly increase the amount of force used while watching to see if the slide it moving at all. Remember to be sure it is unloaded and that the magazine is out of the gun.
_________________ "There's two things in life you can't take back... Bullets and words. So make sure you hit what you aim at and make sure you mean what you say."
Thu Oct 06, 2011 12:19 pm
Willius
Site Supporter
Location: Western Washington Joined: Mon Oct 3, 2011 Posts: 59
I've actually worked on one of these a while back that was having the same issue. If I remember correctly it had a bent or damaged ejector that was preventing the slide from coming off. It's possible that a pin has also worked it's way loose and it binding the slide. A few moderate taps with a rubber mallet got the slide off and then I addressed the issues. When I say moderate I mean fairly aggressive but not full power by any means. Start by tapping the rear of the slide gently and slowly increase the amount of force used while watching to see if the slide it moving at all. Remember to be sure it is unloaded and that the magazine is out of the gun.
Yep. A couple of firm taps with my mallet had the slide off in no time. Thanks for the tip. After getting the slide off I can honestly say: They sure don't make them like this anymore. Talk about rough machine work...
Sat Oct 08, 2011 12:15 pm
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52029
Real Name: Steve
I've actually worked on one of these a while back that was having the same issue. If I remember correctly it had a bent or damaged ejector that was preventing the slide from coming off. It's possible that a pin has also worked it's way loose and it binding the slide. A few moderate taps with a rubber mallet got the slide off and then I addressed the issues. When I say moderate I mean fairly aggressive but not full power by any means. Start by tapping the rear of the slide gently and slowly increase the amount of force used while watching to see if the slide it moving at all. Remember to be sure it is unloaded and that the magazine is out of the gun.
Yep. A couple of firm taps with my mallet had the slide off in no time. Thanks for the tip. After getting the slide off I can honestly say: They sure don't make them like this anymore. Talk about rough machine work...
Happy to help. Glad you got it apart.
_________________ "There's two things in life you can't take back... Bullets and words. So make sure you hit what you aim at and make sure you mean what you say."
Sat Oct 08, 2011 1:24 pm
Willius
Site Supporter
Location: Western Washington Joined: Mon Oct 3, 2011 Posts: 59
Well. Looks like this one's going to need a little more than I can offer it without taking it to an actual gunsmith. I'd really like to get it firing but don't want to dump a bunch of cash into it as it's not worth much anyway. Can anyone recomend a gunsmith in north King County that they've dealt with and had good results from?
Mon Oct 10, 2011 10:48 am
Massivedesign
Site Admin
Location: Olympia, WA Joined: Fri Mar 11, 2011 Posts: 38307
Real Name: Dan
Users browsing this forum: No registered users and 22 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum