 |
 |
It is currently Fri Apr 19, 2024 6:14 am |
|
All times are UTC - 8 hours |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Page 1 of 1 |
[ 7 posts ] |
| Print view | Previous topic | Next topic |
Pin and Welding Requested
| Author | Message |
|---|---|
|
Site Supporter   Location: Tacoma/Seattle Joined: Wed Dec 27, 2017 Posts: 157 Real Name: Jae Lee 
|
I’m wanting to do a pin and welded 14.5” build but it seems that it’s quite difficult to find a pre pinned barrel that has the muzzle device I want.
Is anyone able to pin and weld for me (Tacoma/Seattle area) for a little bit of cash? I’ll try to find a muzzle device that’s already pre-drilled. |
| Sun Feb 10, 2019 7:25 pm |
|
|
|
 Location: Ohio Joined: Fri Nov 9, 2012 Posts: 3924 Real Name: Sean
|
Rehv Arms can do it. I've had a couple done by them with great results and decently quick turn around time. In Tacoma, I do believe MD Firearms can do that in their gunshop as well.
_________________ United States Army, Retired. 2001 - 2023 |
| Sun Feb 10, 2019 9:30 pm |
|
|
|
|
Site Supporter Location: Tacoma/Seattle Joined: Wed Dec 27, 2017 Posts: 157 Real Name: Jae Lee
|
waglocker wrote: Rehv Arms can do it. I've had a couple done by them with great results and decently quick turn around time. In Tacoma, I do believe MD Firearms can do that in their gunshop as well. Do you by chance know how much it cost? |
| Sun Feb 10, 2019 9:58 pm |
|
|
|
|
Site Supporter  Location: S. Everett Joined: Thu May 2, 2013 Posts: 3042
|
I would recommend rainier arms, but they’ve had two of my rifles in there for the last two months....so, I’m not a happy camping individual at the moment. Just trying to be patient since I’ve been shooting with other guns I have.
Sent from my iPhone using Tapatalk |
| Sun Feb 10, 2019 11:14 pm |
|
|
|
|
Site Supporter / FFL Dealer  Location: Tacoma, Washington Joined: Fri Nov 21, 2014 Posts: 8358
|
Surely someone on here can drill and weld. Well before my time of smithing I had two of these done in about 20 minutes by a guy down the street. They looked just as good as any blind pin weld I’d ever seen on a BCM factory setup.
_________________ BLACK HAMMER ARMS Buy A Suppressor http://www.silencershop.com/blackhammerarms Type 7 Class 2 SOT NFA Dealer 1911 Pistolsmithing Firearm Refinishing GLOCK Certified Armorer CMMG Authorized Dealer NEMO Arms Authorized Dealer http://www.blackhammerarms.com http://www.facebook.com/blackhammerarms https://www.instagram.com/blackhammerarms/ |
| Sun Feb 10, 2019 11:44 pm |
|
|
|
|
Site Supporter Location: S. Everett Joined: Thu May 2, 2013 Posts: 3042
|
Well....I didn’t just trust anyone since my muzzle devices are suppressor hosts....
Sent from my iPhone using Tapatalk |
| Mon Feb 11, 2019 2:14 am |
|
|
|
|
Site Supporter / FFL Dealer  Location: snohomish Joined: Wed Feb 11, 2015 Posts: 212
|
I have all the tooling to drill muzzle devices, pin and weld it for you(as long as it's not titanium or aluminum) if you're still looking for someone to do that for you.
_________________ Life isn't about the money you make, the car you drive, the house you live in or being the CEO of a company. Life is about enjoying each day, experiencing everything the world has to offer you and when the day comes, standing at your makers door fully satisfied with what you did with the little bit of sand that was put in your hourglass. |
| Sat Feb 16, 2019 8:35 pm |
|
|
|
|
|
Page 1 of 1 |
[ 7 posts ] |
|
All times are UTC - 8 hours |
Who is online |
Users browsing this forum: No registered users and 38 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|