WaGuns.org https://waguns.org/ |
|
TCB's Pool Install https://waguns.org/viewtopic.php?f=148&t=121940 |
Page 3 of 23 |
Author: | Pvanderzee [ Fri Jun 04, 2021 9:55 am ] |
Post subject: | Re: TCB's Pool Install |
Arisaka wrote: First class work, Casey! And ditching in 111 degrees sounds like a good time! Should post the pics in the "What did you cook today?" thread. |
Author: | Caveman Jim [ Fri Jun 04, 2021 11:25 am ] |
Post subject: | Re: TCB's Pool Install |
Arisaka wrote: First class work, Casey! And ditching in 111 degrees sounds like a good time! But it’s a DRY heat... |
Author: | TINCANBANDIT [ Fri Jun 04, 2021 2:43 pm ] |
Post subject: | Re: TCB's Pool Install |
yeah, it ain't easy, but we have concrete coming tomorrow, so we had to shake a leg more pictures coming Cable guy is coming Sunday to re route the cable coax underground |
Author: | TINCANBANDIT [ Sat Jun 05, 2021 4:24 am ] |
Post subject: | Re: TCB's Pool Install |
we have the forms for the wall footing 99% done. I have to get out there this morning and bend the vertical uprights for the blocks to tie them to the footing.... |
Author: | movingviolation [ Sat Jun 05, 2021 6:29 am ] |
Post subject: | Re: TCB's Pool Install |
Build that wall! Build that wall! Build that wall! |
Author: | jukk0u [ Sat Jun 05, 2021 4:58 pm ] |
Post subject: | Re: TCB's Pool Install |
needs moar steel! |
Author: | RENCORP [ Sat Jun 05, 2021 6:54 pm ] |
Post subject: | Re: TCB's Pool Install |
I just want the old pale green truck that shows up in the background of a bunch of your photos. |
Author: | usrifle [ Sat Jun 05, 2021 7:54 pm ] |
Post subject: | Re: TCB's Pool Install |
jukk0u wrote: needs moar steel! I would agree. |
Author: | TINCANBANDIT [ Sun Jun 06, 2021 5:14 am ] |
Post subject: | Re: TCB's Pool Install |
Cement truck arrived on time We poured and screeded, then troweled it out where the block go (in the center of the footing) Today we start laying block |
Author: | TINCANBANDIT [ Sun Jun 06, 2021 5:14 am ] |
Post subject: | Re: TCB's Pool Install |
RENCORP wrote: I just want the old pale green truck that shows up in the background of a bunch of your photos. 1972 C20 Chevy Needs a complete resto, but supposedly runs |
Author: | TINCANBANDIT [ Tue Jun 08, 2021 7:40 am ] |
Post subject: | Re: TCB's Pool Install |
quick update, we removed the forms and cleaned up the surface then we used the hoe to remove the excess dirt I purchased a cheap cement mixer at Harbor Freight.....couldn't find a used one and renting one would pay for a new one several times over next step is laying the block |
Author: | TINCANBANDIT [ Fri Jun 11, 2021 10:29 am ] |
Post subject: | Re: TCB's Pool Install |
We got the wire pulled to the pump house/future shop panel. We have to wait to pull the wire to the existing house panel when the utility is performing their part of the service upgrade. for liability reasons they won't let us into the existing meter can no pictures today...it was all hands on deck getting warm today, so we are headed to the river. One of my new neighbors is taking us for a ride on his boat |
Author: | TINCANBANDIT [ Sun Jun 13, 2021 3:58 am ] |
Post subject: | Re: TCB's Pool Install |
We are now starting on the wall, we started with the pillar in the corner (SW corner). We will put one of these decorative pillars every 20 feet and at the corners, using split face (rough edge) block We made some progress before the damn Harbor Freight cement mixer died. So I went to Home Depot and bought the bigger, better one This morning we hope to get this corner finished and start the other corner |
Author: | jukk0u [ Sun Jun 13, 2021 6:36 am ] |
Post subject: | Re: TCB's Pool Install |
No gate in that side, brother? |
Author: | Arisaka [ Sun Jun 13, 2021 6:49 am ] |
Post subject: | Re: TCB's Pool Install |
You knew that harbor freight shit would die on you. |
Page 3 of 23 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |