Looking for bolt knob threading....

[mrproc1]

Hey Ya'll....
Looking for someone to thread a factory bolt knob from a Remington 700, so I can install a tactical bolt knob....

[NWRed]

Stokes used to offer that as a service, but I dont know if he's still doing it.

[JCook]

we can do it for you at Summit Arms. $100 and that includes reblueing the bolt

[Sinus211]

Contact Tom Ryder at SPR industries. He's based out of Lake Forest Park. None better. Member tpryder

[deadshot2]

Check out the YouTube videos on bolt handle threading.

It's a pretty easy DIY project if you have a grinder, file, Threading Die, and patience.

Did one in about 2 hours start to finish and used a Die I borrowed from my son.

Just don't grind any farther up the handle than what the handle will cover and don't sweat imperfect threads. They'll all be hidden under the new handle. Use some loctite to keep the handle from backing off.

If you have the tools (and patience) cost is ZERO.

[db-elwood]

Contact Tom Ryder at SPR industries. He's based out of Lake Forest Park. None better. Member tpryder

A big for Tom and im gonna ask to build my next rifle.

[High country]

Here's a fixture I made to do it in my shop. Hope it helps someone.

[MadPick]

Welcome to WaGuns, Greg! Thanks for sharing.

[cootduster]

High country,



Thanks for your post and info.

cootduster