Thu Dec 07, 2017 6:38 pm
Thu Dec 07, 2017 7:36 pm
Fri Dec 08, 2017 10:41 am
Fri Dec 08, 2017 11:09 am
delliottg wrote:Thanks Dana, I was hoping you'd respond. I'd assume the plunger tube could be staked after the fact, like say if somebody brought their new 1911 to the NY Shoot, and someone else brought their staking tool?
It didn't occur to me to look for a notch in the ejector leg, so I'll have to see if I can get it back out to look. It went in relatively easily, but not sure what it might take to get it back out to check for/cut the notch.
Fri Dec 08, 2017 12:59 pm
Fri Dec 08, 2017 1:12 pm
Fri Dec 15, 2017 8:19 pm
Sat Dec 16, 2017 2:32 pm
capincurt wrote:I have the carbide bit and plunger staking tool if you need to borrow them. I am in Snohomish
https://www.midwayusa.com/product/10073 ... -tool-1911
Sun Dec 17, 2017 7:39 am
Mon Dec 18, 2017 7:25 pm
Mon Dec 18, 2017 8:01 pm
Mon Dec 18, 2017 8:12 pm
dreadi wrote:Are you talking about fitting the barrel hood when you say shroud?
How much upper lug engagement are you getting?
Tue Dec 19, 2017 4:33 pm
Tue Dec 19, 2017 6:46 pm
Tue Dec 19, 2017 9:45 pm