Thu Dec 28, 2023 3:57 pm
Thu Dec 28, 2023 5:29 pm
Thu Dec 28, 2023 5:33 pm
Thu Dec 28, 2023 5:42 pm
Thu Dec 28, 2023 6:10 pm
11.25dreadi wrote:What’s the distance from the gas port to the barrel extension shoulder?
BLACK HAMMER ARMS
07/02 NFA Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms
Thu Dec 28, 2023 6:12 pm
Thanks! I should have known those dimensions were somewhere. My rifle is 11.25 from gas shoulder to upper. Apparently this is about an inch short. Story of my life. WTFjukk0u wrote:Does any of this help?
Thu Dec 28, 2023 6:57 pm
Fri Dec 29, 2023 8:34 am
Fri Dec 29, 2023 8:37 am
Fri Dec 29, 2023 8:42 am
This is what I was thinking…jukk0u wrote:I think I'd double check that the gas tube wasn't cut long.
Fri Dec 29, 2023 9:34 am
Fri Dec 29, 2023 1:28 pm
Fri Dec 29, 2023 2:56 pm
Me threejukk0u wrote:I think I'd double check that the gas tube wasn't cut long.
Fri Dec 29, 2023 3:41 pm
Fri Dec 29, 2023 4:30 pm
This led me in the right direction. I learned something new today.tannardog wrote:There is also a rifle length gas tube that is longer than a standard rifle length tube. I cannot quote the dimensions but it is in use on Wilson Combat AR10 uppers, it is slightly longer than a milspec rifle length tube. I ran into this when putting an AR10 together. I ordered a rifle length tube and it was too short, found out my upper was "Wilson" spec.
.
https://wilsoncombat.com/gas-tube-rifle ... ar-10.html
Rifle Length - AR-10/LR308/SR25
Mil-spec stainless tube
Length: 15.5"
Tube only
Does not fit AR-15 rifles
I wonder if you accidentally got one of these?