|
Register •
FAQ •
My feedback
• Login
|
|
|
|
It is currently Fri Apr 19, 2024 11:48 am
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Author |
Message |
shootingbrandon
Location: Marysville Joined: Fri Jun 23, 2017 Posts: 12
Real Name: Brandon
|
Can anyone tell me about the Marysville rifle club. I'm close to it and am interested in checking it out and potentially joining. Do they let people shoot the USPSA matches with a .22? Do they now or are they possibly going to start the NSSF rimfire challenge? Do they have steel plates and/or poppers set up on the pistol or rifle range? I was thinking about checking it out tomorrow during the open public shoot in the afternoon. Is anyone here a member that is going to be heading that direction tomorrow who could show me around? Thanks all ahead of time for the responses.
|
Wed Jun 28, 2017 8:14 pm |
|
|
NickBlasta
Location: Port Orchard Joined: Tue Nov 25, 2014 Posts: 47
|
You can't shoot USPSA with a .22, the rules specify 9mm as a minimum. You can usually borrow some gear though if you need. You have to help with their match setup the day before to get the safety check required to participate in your first match. I don't think they do any fun steel type shoots.
|
Thu Aug 17, 2017 2:08 pm |
|
|
Sinus211
Site Moderator
Location: Marysville Joined: Thu Mar 22, 2012 Posts: 13503
Real Name: Mike
|
I was up at MRC today on the pistol range. No steel on the pistol range. Centerfire steel at 225 yds on rifle and .22 rimfire steel at 50 and 100 yds if I remember correctly. Great place to shoot! Membership dues are low but require that you put in a certain amount of work hours every year. Either on work days to maintain/improve the ranges or working at hunter sight in. The waiting list can take a little while so best to send in your application as soon as possible.
The 2 of us guys were the only people on the pistol range for almost 2 hours today. Very peaceful.
_________________Licensed/Bonded/Insured Hardwood Floor Installer/Finisher http://www.hardwoodfloorsnw.com/
|
Thu Aug 17, 2017 5:25 pm |
|
|
old11bravo
Site Supporter
Location: Everett Joined: Mon Apr 22, 2013 Posts: 3421
Real Name: Ron
|
sinus211 wrote: I was up at MRC today on the pistol range. No steel on the pistol range. Centerfire steel at 225 yds on rifle and .22 rimfire steel at 50 and 100 yds if I remember correctly. Great place to shoot! Membership dues are low but require that you put in a certain amount of work hours every year. Either on work days to maintain/improve the ranges or working at hunter sight in. The waiting list can take a little while so best to send in your application as soon as possible.
The 2 of us guys were the only people on the pistol range for almost 2 hours today. Very peaceful.
|
Fri Aug 18, 2017 1:13 am |
|
|
jukk0u
Site Supporter
Location: Lynnwood and at large Joined: Wed May 1, 2013 Posts: 21268
Real Name: Vick Lagina
|
old11bravo wrote: sinus211 wrote: I was up at MRC today on the pistol range. No steel on the pistol range. Centerfire steel at 225 yds on rifle and .22 rimfire steel at 50 and 100 yds if I remember correctly. Great place to shoot! Membership dues are low but require that you put in a certain amount of work hours every year. Either on work days to maintain/improve the ranges or working at hunter sight in. The waiting list can take a little while so best to send in your application as soon as possible.
The 2 of us guys were the only people on the pistol range for almost 2 hours today. Very peaceful. Don't you start with me. Don't you have a gym suit to clean?
_________________ “Finding ‘common ground’ with the thinking of evil men is a fool’s errand” ~ Herschel Smith
"The said Constitution shall never be construed to authorize Congress to prevent the people of the United States who are peaceable citizens from keeping their own arms." ~ Samuel Adams
“A return to First Principles in a Republic is sometimes caused by simple virtues of a single man. His good example has such an influence that the good men strive to imitate him, and the wicked are ashamed to lead a life so contrary to his example. Before all else, be armed!” ~ Niccolo Machiavelli
Láodòng zhèng zhūwèi zìyóu
FJB
|
Fri Aug 18, 2017 4:58 am |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 75 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|