The benefits extend to the tracking of your scope. Undue stress on the tubes can affect the tracking i.e. the accuracy of movements when adjusting the turrets for a really long shot, and then returning to zero since there is tension on the elevators from a crimped or bent tube.
This tension can/will affect the life of the elevators too, if you use them to make your long shots. (if you're using hold offs...well, then maybe you don't need those fancy turrets?)
Some of the benefits are strictly cosmetic. when switching scopes to different rifles, it may require different spacing of the rings and the old positions may show marks from where the unlapped rings dug in.
My un-learned opinions... feel free to correct.
EDIT: Try a scope tracking test. Here's one you can do without going to the range:
https://gununiversity.com/indoor-tall-t ... king-test/EDIT 2: I made a tall target myself calibrated for 100 yards on some cardboard. It's easy cheap and fun.
You can also make a square target and see how it tracks up, down, left, right and return to zero.