|
Register •
FAQ •
My feedback
• Login
|
|
|
|
It is currently Wed Apr 17, 2024 8:18 pm
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Author |
Message |
bmet923
Site Supporter
Location: bonney lake Joined: Wed Aug 29, 2012 Posts: 434
Real Name: Jerry
|
i am looking at putting a muzzle brake on my 308 bolt gun and was looking at some the options for timing. Some people say crush washers are an absolute no, with that said there has to be a million rifles out there running a crush washer with no problem. should i use shims, lock nut, crush washer. Savage 10 308 and installing a Fortis RED brake for info. Tell me i am thinking too much into this
|
Mon Mar 27, 2017 3:52 pm |
|
|
RocketScott
Site Supporter
Location: Kentucky Joined: Fri Jan 16, 2015 Posts: 11087
|
I've never had a problem with crush washers. I only switched to using shims since getting into suppressors.
Sent from my iPhone using Tapatalk
_________________ You may be right, I may be crazy, but it just may be a lunatic you're looking for
|
Mon Mar 27, 2017 7:16 pm |
|
|
KeystoneCowboy
Site Supporter
Location: Burlington Joined: Wed Aug 22, 2012 Posts: 5999
Real Name: Kyle
|
Shims like this are cheap and work well. Or just a cheap peel washer works. However its hard to to go back if you fuck up a peel washer. Gemtech Precision Muzzle Device Alignment Shim Set For Threaded Rifle Barrels (1/2-28TPI) https://www.amazon.com/dp/B00KA0P0Y6/re ... 2ybQMA0NN6
_________________ Looking for: S&W Schofield 2x (.38/357) Coonan 1911 Nemo Omen JM Marlin 39M Tikka T3 Tactical(.308) BAR(.308)
|
Mon Mar 27, 2017 7:43 pm |
|
|
Unicorn
Joined: Tue Apr 19, 2011 Posts: 2604
|
Crush washers are fine, cheap, and easy. IF you are not going to ever use that muzzle device to mount a silencer. If so, you'll want to use peel washers or shims. Crush washers have the chance of not putting your muzzle device on evenly so it could be slightly tilted. Not a big deal for a 1.5 inch flash hider with a pretty big hole, but could be with a 8 to 14 inch silencer with a hole not too much larger than your bore. So it could lead to baffle or end cap strikes.
|
Mon Mar 27, 2017 10:50 pm |
|
|
Mediumrarechicken
Location: Puyallup Joined: Thu Aug 16, 2012 Posts: 9065
Real Name: Richard Fitzwelliner
|
I just use the washer that comes with the muzzle. If it doesn't line up lay some sandpaper on the table and take some material off till it's gtg.
_________________ If she sits on your face and you can still hear, SHE'S NOT FAT.
I'm going to type out 3 paragraphs and wax eloquently about a similar story in my life. Pm me if you figured it out.
|
Tue Mar 28, 2017 5:11 am |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|