**********************************
WINNERS!!!#1 - Soldier_Citizen
#2 - wklink
#3 - duke EB
**********************************
A little less than a year ago,
I5 Guns and Ammo introduced us to his buddy Jack. Jack was an AR15 lower, and we promptly held a popular
RAFFLE where she ended up going home with a lucky member.
Well, a couple days ago, I was at
I5 Guns and Ammo again, and was introduced to Jack10. This Jack is jacked. All hopped up on 'Roids, but still looks good enough to take home to meet mom.
So, history shall repeat itself, but this time, it's better.
*** NEW INFO ADDED 8/8/16 *** - There are now THREE prizes in this PIF/Raffle.. PIFFLE. Prize #1Meet Jack-10..
You see, this isn't just like any other Jack.. This Jack10 is the .308 version... So it's more like Jack's really big brother.
Oh, did I mention that Jack-10 comes with a matching fitted upper? I didn't? Well, it DOES!
What you see there is none other than
"The Jack-10" upper and lower from Spikes Tactical.
Features:
- An oversized integral trigger guard
- Heavily flared magwell
- CNC machined from 7075-T6 Billet aluminum
- Type III Hardcoat Anodized finish
- Suitable for .308, 6.5 Creedmoor or 338 Federal
Compatibility:
- Bolt Carrier, Bolt & Barrel: any AR style 308 barrel/BCG
- Barrel Nut: SR25 or DPMS
- Handguard Rail Height: SR25, DPMS High, Armalite AR10
- Magazine: Any SR25 or DPMS (Magpul, DPMS, Knight, ...)
- Trigger Group: any AR compatible trigger
Just like his brother, isn't Jack-10 pretty badass?
Now, if you want to own Jack-10, you can! You can go out and buy Jack for $700+ (if you can find one), or... You can throw $5 and get a raffle ticket and take your chances.
Prize #2Donated by Brad at
http://www.bradsguns.com/, I present to you, the
NO LOGO AR-15 SPARTAN LOWER!FEATURES:-Manufactured from a solid block of Aircraft Grade 7075-T6 Billet Aluminum
-Broached Magazine Well with drop free design and beveled bottom lip
-CNC Deep Rotary Engraved to exceed ATF depth requirements
-MIL-A-8625 Type III Hard Anodizing (Deep Black)
-Captured take down pin spring/detent (includes hardware)-Uses 1/16” Allen wrench
(Rear take-down pin spring may need to be trimmed if set screw is used to give proper tension on pin)
-Upper Tensioning screw (includes hardware)-Uses 1/8” Allen wrench
-Threaded bolt catch pin hole (includes hardware)-Uses 1/16” Allen wrench
-Safety Selector pocket notched for BAD 45 degree selector drop in with no modifications needed
-Engraving accommodates 45 degree BAD, 60 degree Noveske, and 90 degree (standard) selectors
-Compatible with Norgon and other aftermarket ambi mag releases
-Integrated enhanced trigger guard
-Low Shelf design to make full auto conversions for LE, MIL or post sample machine guns easier (RDIAS/RLL)
-Continuous threading through receiver extension hole and pistol grip screw hole
-Compatible with all Lower Parts Kits, Mil-Spec and Commercial receiver extensions, and most aftermarket parts.
-Like most billet lowers, the Magpul BAD lever will NOT function properly on the ML-15
-Weighs 11.2 oz
Prize #3This one is from WaGuns, to you. This is the same Spartan lower as above.
Here are the details:- You can buy one chance (i.e., one "ticket") to win for $5. You can buy as many chances as you like.
- The raffle will end at 10:00 a.m. on Tuesday, August 16th. The entries will be put on individual pieces of paper and drawn by a 3rd party at Jack-10's home (I5 Guns and Ammo). The drawing should take place around noon and we will post the username of the winner on this thread once the drawing is done.
- The 1st winner will win the right to choose & buy any of the lowers for $1. The lower is not free; it will cost the winner $1. (This is for legal reasons.)
- The 2nd winner will win the right to choose & buy the next available lower. The lower is not free; it will cost the winner $1. (This is for legal reasons.)
- The 3rd place winner will get the remaining lower, whatever it may be. The lower is not free; it will cost the winner $1. (This is for legal reasons.)
- Winner of this must be eligible to own a firearm and be able to pass a background check. "The Jack-10" will need to be picked up at I5 Guns, in person and the Spartan's at Brad's in Bonney Lake
- The $ raised from this Raffle will go to support WaGuns.org and their events. Bonus: If you are not a Site Supporter, entering this Raffle will make you one!
Here is how to Donate and Enter- Preferred method: Go to our PayPal donation page http://www.waguns.org/donate/paypal.php and send the money, or send PayPal directly to paypal@waguns.org. Please be discreet within PP and do not mention "gun" or anything like that -- just give us your username. If you do not have PP, then you can still use the link above and use your CC, just follow the prompts. If you want to mail a check/MO etc, please send me a PM. Note: Funds MUST be received prior to entry being recorded. If your check isn't here and it is time to draw, you are not IN.
- Reply to this thread and post how many chances you have bought. For example, "In for 10 chances ($50), PayPal sent." This helps us keep track of who is buying what.
So, you may think the Jack is ugly as sin... Or, you may think that it's the most badass thing you have ever seen... But does it really matter? We are talking about a .308 UPPER and LOWER here.... Man up, Jack up.... Or, maybe a little cranked up .22 is your thing. The Spartan can help if you feel like manning up.
Who's in?
**** ENTRY LIST ****San - 20
usrifle - 5
beckdw - 10
Beer Hounds - 5
Madpick - 21
duke EB - 5
sinus211 - 20
oldkim - 8
db-elwood - 24
wklink - 10
Slipknot95758 - 5
DGM33 - 20
wilmermj -
5 10
milowebailey - 10
aone - 10
stompah - 5
cramer - 5
DSynger - 2
Col_Temp - 4
Bxc53 - 5
Jgehrksta - 5
leaferikson - 5
joao01 - 1
Jammer Six - 10
Peckerinak - 4
gwaugh - 2
dennydp - 4
someguyinseattle - 2
Rod79 - 5
L_O_G - 10
kf7mjf - 1
BadKarma - 20
badclam - 10
dusty - 2
everett bill - 5
mash man - 10
Soldier_Citizen - 2
Chevytruckman - 5
golddigger14s - 1
edogg - 2
shlo812 - 10
mustangfreek - 1
capincurt - 1
mcyclonegt - 10