 |
 |
It is currently Thu Apr 18, 2024 9:01 pm |
|
All times are UTC - 8 hours |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Form One Newbie From VA
Moderator: delliottg
|
Page 1 of 1 |
[ 13 posts ] |
| Print view | Previous topic | Next topic |
Form One Newbie From VA
| Author | Message |
|---|---|
 Location: Richmond Joined: Tue May 10, 2016 Posts: 2 Real Name: Martin D. 
|
New to he the site and working on a few Form Ones! All advice is welcome. Especially on blast baffle size for a 10 inch .308 form one can.
Particulars, SDTA Ti 9.6 inch tube, Ti spacer tubing and 60* Ti cone baffles and Ti caps. Now, any thoughts on the spacing of each are more then welcome! Thanks, Boomer |
| Mon May 09, 2016 9:27 pm |
|
|
|
|
Site Moderator / In Memoriam  Location: Ryderwood WA. Joined: Sun May 15, 2011 Posts: 5337
|
 Welcome to WaGuns !!!!!!!!!!!!! Welcome to Washington. There are a fair number of people on here, who can probably help you with your answer. Just keep the faith and wait a couple of days. "If you will build it, They will come". cootduster _________________ Retired May 30th 2018, after 41years. I'm not old. I'm just no longer young !!! |
| Mon May 09, 2016 11:27 pm |
|
|
|
|
Site Supporter   Location: Maple Valley, WA Joined: Thu Mar 17, 2011 Posts: 9266 Real Name: Young
|
I have one... 10" Ti build from SD.
I use one spacer for the blast area near muzzle and then just filled with baffles. I'm not using mine for 30 caliber but I did register it as a 30. (so all the holes are for 30 caliber). I'm shooting .223 I have been playing with a spring as a spacer but I'm still in the testing phase... There's real no answer or design out there listed for the 10" (9.6") tubes. Make sure it's tight as hell... even with .223 it will loosen after 40 rounds (both baffles - spacing and end caps). I can't even imagine what a 30 caliber would do. |
| Tue May 10, 2016 7:14 am |
|
|
|
|
Site Supporter  Location: Tacoma/Puyallup Joined: Tue May 8, 2012 Posts: 4340 Real Name: Larry
|
Make sure to check out SDT forums, all your answers will be there..
http://sdtacticalarms.boards.net/ _________________ Talons wrote: it's too plastic, even for me. it's like old, overworked, plastic everywhere old pornwhore amounts of plastic. |
| Tue May 10, 2016 7:55 pm |
|
|
|
|
Site Supporter  Location: south 'merca Joined: Wed Jul 25, 2012 Posts: 9738 Real Name: Mike
|
lamrith wrote: Make sure to check out SDT forums, all your answers will be there.. http://sdtacticalarms.boards.net/ I thought I saw a familiar name over there _________________ "No Quarter, No Mercy" mash_man wrote: #gangbangerlivesmatter |
| Wed May 11, 2016 4:38 pm |
|
|
|
|
Site Supporter  Location: Monroe Joined: Mon Jul 23, 2012 Posts: 1285 Real Name: Chris
|
oldkim wrote: I have one... 10" Ti build from SD. I use one spacer for the blast area near muzzle and then just filled with baffles. I'm not using mine for 30 caliber but I did register it as a 30. (so all the holes are for 30 caliber). I'm shooting .223 I have been playing with a spring as a spacer but I'm still in the testing phase... There's real no answer or design out there listed for the 10" (9.6") tubes. Make sure it's tight as hell... even with .223 it will loosen after 40 rounds (both baffles - spacing and end caps). I can't even imagine what a 30 caliber would do. Spring info? _________________ I'm going camping... |
| Wed May 11, 2016 5:11 pm |
|
|
|
|
Site Supporter Location: Tacoma/Puyallup Joined: Tue May 8, 2012 Posts: 4340 Real Name: Larry
|
Soldier_Citizen wrote: lamrith wrote: Make sure to check out SDT forums, all your answers will be there.. http://sdtacticalarms.boards.net/ I thought I saw a familiar name over there Yeah you see this name about anywhere and it is most likely me, I get around. Not quite as much as drew though. Built a 8" Ti can in 9mm from info on that site that works awesome. Comparable DB to much more expensive "pro" can when tested on a bolt gun a few weeks back. Next up is a 10" 30cal. _________________ Talons wrote: it's too plastic, even for me. it's like old, overworked, plastic everywhere old pornwhore amounts of plastic. |
| Wed May 11, 2016 8:20 pm |
|
|
|
|
Site Supporter Location: Maple Valley, WA Joined: Thu Mar 17, 2011 Posts: 9266 Real Name: Young
|
Chrisb9381 wrote: Spring info? Valve Spring PART #:SEP VS1461 $15 Fits in the inner diameter of the tube. Can be used as spacer. Ordered from NAPA Auto Parts. Amazon is like 2-3+ times more. Just in case - Freeze plugs... Expansion Plug Expansion Plug, 1.350"; 34.300 mm PART #:SEP 3813179 |
| Thu May 12, 2016 7:29 am |
|
|
|
 Site Admin   Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52035 Real Name: Steve
|
I'll throw my two cents in on the spring.
I cut it in half, which is about the length I wanted for that blast chamber area. It worked great at first, and I was very happy with it. After a while, since the spring doesn't sit completely flat on the end where you cut it, it started to cause the first baffle to rotate a bit (not stay perpendicular to the tube). My suggestion is to either avoid the spring or use the full length of it, which should work better than just half. _________________ Steve Benefactor Life Member, National Rifle Association Life Member, Second Amendment Foundation Patriot & Life Member, Gun Owners of America Life Member, Citizens Committee for the Right to Keep and Bear Arms Legal Action Supporter, Firearms Policy Coalition Member, NAGR/NFGR Please support the organizations that support all of us. Leave it cleaner than you found it. |
| Thu May 12, 2016 3:53 pm |
|
|
|
|
Site Supporter Location: Maple Valley, WA Joined: Thu Mar 17, 2011 Posts: 9266 Real Name: Young
|
I was wondering what you did...
I use the full length for the blast chamber but I have 9.6" (10" build) versus MadPicks 6" build - so I can understand why you cut it. |
| Thu May 12, 2016 7:41 pm |
|
|
|
|
Site Supporter Location: Monroe Joined: Mon Jul 23, 2012 Posts: 1285 Real Name: Chris
|
oldkim wrote: Chrisb9381 wrote: Spring info? Valve Spring PART #:SEP VS1461 $15 Fits in the inner diameter of the tube. Can be used as spacer. Ordered from NAPA Auto Parts. Amazon is like 2-3+ times more. Just in case - Freeze plugs... Expansion Plug Expansion Plug, 1.350"; 34.300 mm PART #:SEP 3813179 Are you using this spring with a direct thread end cap or will the SDTA muzzle break fit inside of it? _________________ I'm going camping... |
| Wed May 18, 2016 7:47 pm |
|
|
|
|
Site Admin Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52035 Real Name: Steve
|
With the direct thread end cap.
_________________ Steve Benefactor Life Member, National Rifle Association Life Member, Second Amendment Foundation Patriot & Life Member, Gun Owners of America Life Member, Citizens Committee for the Right to Keep and Bear Arms Legal Action Supporter, Firearms Policy Coalition Member, NAGR/NFGR Please support the organizations that support all of us. Leave it cleaner than you found it. |
| Wed May 18, 2016 7:57 pm |
|
|
|
|
Site Supporter Location: Monroe Joined: Mon Jul 23, 2012 Posts: 1285 Real Name: Chris
|
MadPick wrote: With the direct thread end cap. thanks _________________ I'm going camping... |
| Thu May 19, 2016 6:23 am |
|
|
|
|
|
Page 1 of 1 |
[ 13 posts ] |
|
All times are UTC - 8 hours |
Who is online |
Users browsing this forum: No registered users and 53 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|