sinus211 wrote:
Contact Tom Ryder at SPR industries. He's based out of Lake Forest Park. None better. Member tpryder
A big
for Tom and im gonna ask to build my next rifle.
| WaGuns.org https://www.waguns.org/ |
|
| Looking for bolt knob threading.... https://www.waguns.org/viewtopic.php?f=26&t=76623 |
Page 1 of 1 |
| Author: | mrproc1 [ Sun Dec 25, 2016 3:02 pm ] |
| Post subject: | Looking for bolt knob threading.... |
Hey Ya'll.... Looking for someone to thread a factory bolt knob from a Remington 700, so I can install a tactical bolt knob.... |
|
| Author: | NWRed [ Sun Dec 25, 2016 6:49 pm ] |
| Post subject: | Re: Looking for bolt knob threading.... |
Stokes used to offer that as a service, but I dont know if he's still doing it. |
|
| Author: | JCook [ Mon Dec 26, 2016 1:37 am ] |
| Post subject: | Re: Looking for bolt knob threading.... |
we can do it for you at Summit Arms. $100 and that includes reblueing the bolt |
|
| Author: | Sinus211 [ Mon Dec 26, 2016 1:58 am ] |
| Post subject: | Re: Looking for bolt knob threading.... |
Contact Tom Ryder at SPR industries. He's based out of Lake Forest Park. None better. Member tpryder |
|
| Author: | deadshot2 [ Mon Dec 26, 2016 9:30 am ] |
| Post subject: | Re: Looking for bolt knob threading.... |
Check out the YouTube videos on bolt handle threading. It's a pretty easy DIY project if you have a grinder, file, Threading Die, and patience. Did one in about 2 hours start to finish and used a Die I borrowed from my son. Just don't grind any farther up the handle than what the handle will cover and don't sweat imperfect threads. They'll all be hidden under the new handle. Use some loctite to keep the handle from backing off. If you have the tools (and patience) cost is ZERO. |
|
| Author: | db-elwood [ Mon Dec 26, 2016 9:48 am ] |
| Post subject: | Re: Looking for bolt knob threading.... |
sinus211 wrote: Contact Tom Ryder at SPR industries. He's based out of Lake Forest Park. None better. Member tpryder A big for Tom and im gonna ask to build my next rifle.
|
|
| Author: | High country [ Mon Jan 23, 2017 11:17 pm ] |
| Post subject: | Re: Looking for bolt knob threading.... |
Here's a fixture I made to do it in my shop. Hope it helps someone.  
|
|
| Author: | MadPick [ Tue Jan 24, 2017 8:54 am ] |
| Post subject: | Re: Looking for bolt knob threading.... |
Welcome to WaGuns, Greg! Thanks for sharing. 
|
|
| Author: | cootduster [ Tue Jan 24, 2017 7:55 pm ] |
| Post subject: | Re: Looking for bolt knob threading.... |
High country,  Thanks for your post and info. cootduster |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|